Braun Oral-B GENIUS 8000 / 9000 / 9000S / 8100S / 8000N / 9000N Manual (2025)

Braun Oral-B GENIUS 8000 / 9000 / 9000S / 8100S / 8000N / 9000N Manual

Description

1. Brush head
2. Smart Ring
3. On/off button
4. Brushing mode button
5. Handle
6. Brushing mode display
7. Radio transmission display (with Bluetooth wireless technology)
8. Charge level display
9. Charger

Accessories (depending on model):

10. Brush head compartment with protective cover
11. Smartphone holder
    1. Holding brackets
    2. Lever arm
    3. Pull tab
    4. Suction cup
12. Charging travel case
    1. Charge indicator light
    2. USB port
    3. Smart plug port
    4. Inner lid (with smartphone holder)
    5. Removable inlay
13. Smart plug
14. Beauty bag
15. Travel case

Note: Content may vary based on the model purchased.

Specifications
For voltage specifications refer to the bottom of the charging unit. Noise level: 68 dB (A)

Charging and Operating

Your toothbrush has a waterproof handle, is electrically safe and designed for use in the bathroom.

• You may use your toothbrush right away or charge it briefly by placing it on the plugged-in charger (9).
  Note: In case the battery is empty (no lights illuminated on charge level display (8) while charging or no reaction when pressing the on/off button (3)), charge at least for 30 minutes.
• The charge level is indicated on the charge level display (8). Flashing lights indicate that the battery is charging (picture ); once it is fully charged, the lights turn off. A full charge takes typically 15 hours and enables up to 12 days of regular brushing (twice a day, 2 minutes).
  Note: At a very low charge level, the lights might not flash immediately; it can take up to 30 minutes.
  
• If the battery is running low, a red light is flashing on the charge level display and the motor is reducing its speed. Once the battery is empty, the motor will stop; it will need at least a 30-minute charge for one usage.
• You can always store the handle on the plugged-in charging unit to maintain it at full power; a battery overcharge is prevented by device.
  Note: Store handle at room temperature for optimal battery maintenance.

Do not expose handle to temperatures higher than 50°C.

Using your product

Brushing technique

Wet brush head and apply any kind of toothpaste. To avoid splashing, guide the brush head to your teeth before switching on the handle (picture ). When brushing your teeth with one of the Oral-B oscillating-rotating brush heads guide the brush head slowly from tooth to tooth, spending a few seconds on each tooth surface (picture ).

When using the Oral-B «TriZone» brush head place the toothbrush bristles against the teeth at a slight angle towards the gumline. Apply light pressure and start brushing in back and forth motions, just like you would do with a manual toothbrush.
With any brush head start brushing the outsides, then the insides and finally the chewing surfaces. Brush all four quadrants of your mouth equally. You may also consult your dentist or dental hygienist about the right technique for you.
In the first days of using any electric toothbrush, your gums may bleed slightly. In general, bleeding should stop after a few days. Should it persist after 2 weeks, please consult your dentist or dental hygienist. If you have sensitive teeth and/or gums, Oral-B recommends using the «Sensitive» mode (optional in combination with an Oral-B «Sensitive» brush head).

Smart Ring features

Your toothbrush is equipped with a Smart Ring (2) that has various functionalities indicated via different colors of light:
White (default) = Operating and visual timer light (choose individual color via Oral-B App settings)
Red = Pressure sensor light
Blue = Bluetooth pairing indicator

Timer
You can choose between «Professional» or «2-Minute» timer.
The «2-Minute» timer signals with a long stuttering sound and a flashing light of the Smart Ring (2) that the professionally recommended 2-minute brushing time has been reached.
The «Professional» timer signals with a short stuttering sound and a flashing light of the Smart Ring at 30-seconds intervals to move to the next quadrant of your mouth (picture ). A long stuttering sound and a flashing light indicate the end of the professionally recommended 2-minute brushing time.
The timer memorizes the elapsed brushing time, even when the handle is briefly switched off during brushing. The timer resets if pausing longer than 30 seconds, briefly pressing the mode button (4) during pause or placing the handle on the plugged-in charger.
Note: During the use of special Oral-B App features, the visual timer light may be deactivated.

Timer setup:
Your toothbrush comes with the «Professional» timer activated. To change this, press and hold the mode button (4) for 2 seconds. Toggle between timer selection by pressing the on/off button (3). Confirm selection by pressing the mode button.

• 2 LED's illuminated indicate «2-Minute» timer
• 4 LED's illuminated indicate «Professional» timer

Note: You can also set/advance the timer functionality via Oral-B App.

Pressure sensor
If too much pressure is applied, the Smart Ring (2) will light up in red, reminding you to reduce pressure. In addition the pulsation of the brush head will stop and the oscillation movement of the brush head will be reduced (during «Daily Clean», «Pro Clean» and «Sensitive» mode) (picture ).
Periodically check the operation of the pressure sensor by pressing moderately on the brush head during use.

Brushing modes

(depending on model)
Your toothbrush offers different brushing modes indicated on the brushing mode display (6) on your handle («Daily Clean» mode does not illuminate on the brushing mode display):

When operating the «Tongue Clean» mode, we recommend using the «Sensitive» brush head. You can brush your tongue either with or without toothpaste. Brush the whole area of your tongue systematically in gentle movements. The recommended brushing time is 20 seconds; indicated with a flashing light of the Smart Ring.

Your toothbrush automatically starts in the mode selected last. To switch to other modes, successively press the mode button during use (picture ). To return from any mode back to «Daily Clean» mode, press and hold the mode button (4).
Note: You can also set/advance the mode functionality via Oral-B App.

Brush heads

Oral-B offers you a variety of different Oral-B brush heads that fit your Oral-B toothbrush handle.
Our oscillating-rotating brush heads can be used for tooth-by-tooth precision cleaning.

Oral-B CrossAction brush head
Our most advanced brush head. Angled bristles for a precise clean. Lifts and powers away plaque.

Oral-B FlossAction brush head
features micropulse bristles that allow for an outstanding plaque removal in the interdental areas.

Oral-B 3D White brush head
features a special polishing cup to naturally whiten your teeth. Please note that children under 12 years old should not use the Oral-B «3D White» brush head.

Oral-B Sensi Ultrathin brush head
features a combination of regular bristles to clean teeth surfaces and ultrathin bristles for a gentle brushing experience on the gumline.

Most Oral-B brush heads feature light blue INDICATOR bristles to help you monitor brush head replacement need. With thorough brushing, twice a day for two minutes, the blue color will fade halfway approximately within 3 months, indicating the need to exchange your brush head. If the bristles splay before the color recedes, you may exert too much pressure on teeth and gums.
We do not recommend using the Oral-B «FlossAction» or Oral-B «3D White» brush head with braces. You may use the Oral-B «Ortho» brush head, specifically designed to clean around braces and wires.

Connecting your device to your Smartphone

The Oral-B App is available for mobile devices running iOS or Android operating systems. It can be downloaded for free from App Store or Google Play. Your handle has a sensor installed that, together with a «position detection» feature in the app, helps you to detect what areas to brush and for how long so you will never miss a zone. Use it along with your smartphone holder (find details under «Accessories – Smartphone Holder»).

Furthermore, the Oral-B App gives you the opportunity to chart your brushing progress and customize your toothbrush settings (for many more benefits see the Oral-B App instructions).

• Start the Oral-B App. It will guide you through the entire Bluetooth pairing procedure.
  Note: Oral-B App functionality is limited if Bluetooth wireless technology is deactivated on your smartphone (for directions please refer to your smartphone's user manual).
• Any app instructions will be displayed on your smartphone.
• If Bluetooth wireless technology is activated on your handle, the Bluetooth symbol on the radio transmission display (7) illuminates. Once the handle is paired, the Smart Ring (2) flashes briefly.
• Keep your smartphone in close proximity (within 5 m distance) when using it with the handle. Make sure the smartphone is safely positioned in a dry place.

Note: Your smartphone must support Bluetooth 4.0 (or higher)/Bluetooth Smart in order to pair your handle.
Compatible smartphones are listed in App Store or Google Play.

Follow your smartphone's user manual to ensure your phone/charger is designed for use in a bathroom environment.

Check www.oralbappavailability.co.uk for country availability of the Oral-B App.

Cleaning recommendations

After brushing, rinse your brush head under running water with the handle switched on. Switch off and remove the brush head. Clean handle and brush head separately; wipe them dry before reassembling. Unplug the charging unit before cleaning. Brush head compartment and protective cover are dishwasher-safe. Basic charger should be cleaned with a damp cloth only (picture ).

Accessories

(depending on model)

Brush head compartment

(picture A)

Smartphone Holder

• Before each use, make sure mirror, suction cup surface (11d) and holding brackets (11a) are always clean and dry (picture B1). Use a fuzz-free cloth for cleaning suction cup surface and mirror. In particular make sure suction cup surface and mirror are free from any contamination (e.g. hair, dust, oil, fuzz, dirt etc.).
• Press your smartphone holder (11) just with enough pressure, centered at nose level on a sturdy mirror. Then mount the holder by pressing the lever arm (11b) towards the mirror until it snaps in (picture B2).
  Note: Only affix on mirror to ensure safe and correct conditions. For use in bathroom only. Do not use in automobiles.
• Always make sure the smartphone holder is securely mounted on the mirror before inserting your smartphone. Place your smartphone (portrait) sideways in between the holding brackets (11a) by pressing against one bracket with your phone and sliding the other bracket to the side (picture B2). Follow the same procedure to remove your phone again.
• Adjust the overall position for the required angle by moving the ball joint of the holder (picture B3).
• Once done, remove your phone from the holder. Take off the smartphone holder by flipping the lever arm back and pulling the tab carefully (picture B4 1./2.). Affix smartphone holder with each use again.
• The smartphone holder should be cleaned with a damp fuzz-free cloth only (picture ). You may use glass cleaner, alcohol or s imilar products (avoid products with silicone oil).
  Make sure the surface is dry and dust free after cleaning. Store in clean and dry place. If not in use, always remove your smartphone from the holder.

Note: Smartphone width required for usage: minimum 58 mm, maximum 83 mm.

Small parts may come off, keep out of reach of children.

Follow your smartphone's user manual to ensure your phone/charger is designed for use in a bathroom environment.

Charging Travel Case

• To charge your handle (5) place it on the pin in the charging travel case (12) and connect it to an electric outlet, using the extra smart plug (13) provided.
• The flashing light (12a) of the charging travel case indicates that the handle is charging. Once the handle is fully charged the light turns off. A full charge can take up to 12 hours (picture C1).
  Note: You may use the USB port (12b) to charge an electric device while the charging travel case is plugged in. The handle can only be charged with the smart plug (13) (12c) not via USB port.
• The inner lid of the travel case has a built-in smartphone holder (12d), which can hold your smartphone while using (picture C2). Before use, make sure your phone fits the stand and keeps stable.
• The removable inlay (picture C3) (12e) of the travel case is dishwasher-safe (picture ). The outer case should be cleaned with a damp cloth only. Make sure that travel case parts are completely dry before reassembling and toothbrush/brush heads are dry before storing in the travel case.

Note: Clean stains on travel case surface immediately. Store travel case in a clean and dry place.

Follow your smartphone's user manual to ensure your phone/charger is designed for use in a bathroom environment.

Beauty Bag

Store your clean and dry toothbrush/brush heads in the travel case (15) and place it inside the beauty bag (14) (picture D1/2). Clean stains on the surface immediately. The beauty bag should be hand washed only with lukewarm water (30°C – 40°C) (picture ). Store in clean and dry place.
Subject to change without notice.

Trouble Shooting

This rechargeable toothbrush contains a Bluetooth radio which operates in the 2.4 to 2.48 GHz band with a maximum power of 1mW.

IMPORTANT

• Periodically check the entire product/cords/accessories for damage. A damaged or non-functioning unit should no longer be used. If the product/ cords/accessories are damaged, take it to an Oral-B Service Centre. Do not modify or repair the product. This may cause fire, electric shock or injury.
• Usage by children under age 3 is not recommended. Toothbrushes can be used by children and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
• Cleaning and maintenance shall not be performed by children.
• Children shall not play with the appliance.
• Use this product only for its intended use as described in this manual. Do not use attachments which are not recommended by the manufacturer.

• If the product is dropped, the brush head should be replaced before the next use even if no damage is visible.
• Do not place the charger, smart plug or charging travel case in water or liquid or store where it can fall or be pulled into a tub or sink. Do not reach for it when fallen into water. Unplug immediately.
• Do not open and disassemble device. For battery recycling please dispose whole device according to local environmental regulations. Opening the handle will destroy the appliance and invalidate the warranty.
• When unplugging, always hold the power plug instead of the cord. Do not touch the power plug with wet hands. This can cause an electric shock.
• If you are undergoing treatment for any oral care condition, consult your dental professional prior to use.
• This toothbrush is a personal care device and is not intended for use on multiple patients in a dental practice or institution.
• Replace brush head every 3 months or sooner if brush head becomes worn.
• Your charging travel case is provided with a special cord set (smart plug), which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of an electric shock. Only use the special cord set provided with your appliance.

• Your Oral-B toothbrush can be used with your smartphone (find details under «Connecting your device to your Smartphone»).
• To avoid electromagnetic interference and/or compatibility conflicts, deactivate the radio transmission of your toothbrush handle (5) before using it in restricted surroundings, such as aircrafts or specially marked areas in hospitals.
• Deactivate radio transmission by simultaneously pressing the on/off (3) and mode button (4) for 2 seconds until the radio transmission display (7) goes off. Follow the same procedure to reactivate transmission again.
• Persons with pacemakers should always keep the toothbrush more than six inches (15 centimeters) from the pacemaker while turned on. Anytime you suspect interference is taking place, deactivate the radio transmission of your handle.

Internet:
www.oralb.com
www.braun.com
www.service.braun.com

Braun GmbH
Frankfurter Straße 145
61476 Kronberg/Germany

Charger Type 3757
Handle Type 3765
Travel Case Type 3760
Smart Plug Type 492-5214

Documents / Resources

References

• Oral-B App Availability: Supported Countries & Devices | Oral-B UK
• Electric Toothbrushes, Floss, & Dental Health | Oral-B
• Braun Electric Shavers and Razors | Braun
• Braun Service
• App Store - Apple
• Google Play

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Braun Oral-B GENIUS 8000 / 9000 / 9000S / 8100S / 8000N / 9000N Manual